If something is worth doing … it is worth overdoing 🙂
Last night I noticed that my suburb had been upgraded by NBNCo and that Aussie Broadband could now offer me a 1000 megabit per second Internet via NBN HFC at home (The previous NBNCo HFC ‘limit’ at my house was 250 Megabits per second).
Deeper, I was delighted to discover that the Aussie Broadband app allows you to implement a plan/speed change ‘in app’ and has the option to do it ‘right now’.
So I did it ‘right now’ – and – a minute or two later – this:
Well strap my face to a pig and roll me in the mud…
…that is a really, really pleasant Internet speed to have at home 🙂
I’ve had gigabit fibre Internet at the office for years, but having it right in your house is pretty darn cool. Finally feel like we’re starting to catch up with some other countries.
I don’t think I expected it to take quite that long to get to my house, frankly – but – its here now.
That SpeedTest result is on a wired network port… on an 802.11ac wireless connection to an iMac in another room, I’m maxing out at a lazy 300 megabits or so right now. Finally my WiFi is the speed constraint, and nothing else is getting in the way. WiFi speeds fall off very sharply with distance, which is why I tend to put ethernet ports into any buildings I’m doing any sort of work on. You just can’t beat the speed of a wired connection.
The outcome (even via WiFi) is materially snappier compared to even the 250 Megabit per second service. Its like my office has been for years – click on something and (if it is well connected), then ‘blink’ and it has updated the page completely an instant.
The one bummer is that ‘mere’ 50 megabit per second upload speed – for which I still can’t quite countenance why NBNCo insist on that level of artificial throttling. Speed limiting just to make your ‘business’ products more valuable is the sort of evil tactic we used to complain about Telstra engaging in.
That said, 50 megabits per second upload is still ‘substantial’ and it is the increased upload seed that is actually the major factor in the above-mentioned improved ‘snappiness’ of updates. The extent to which upload speed is a real-world constraint to download performance is still a widely un-appreciated thing.
If this inspires you to move to Aussie Broadband as well, just remember you can type in the magic referral code 4549606 when you sign up, to save yourself (and me!) $50 in the process 🙂
While nothing special in some other countries (like… New Zealand… let alone the USA), a better-than-100-Megabit Internet service at home has been an unattainable goal for me in the wilds of Adelaide, South Australia until now.
I have long had access to much faster speeds at the office, via path diverse gigabit fibre links that were installed back when I owned an Internet company, but not at home.
The companies who are giving the NBN a run for their money using fixed wireless services couldn’t help me, because I live in one of those leafy streets full of those tall things that leaves grow on. Our house has no radio line-of-sight to anywhere and no way to ‘fix’ that without the use of chainsaws. Not doing that.
At least, that’s how I felt about it before I’d done it.
I have since found that there are some genuine benefits beyond mere geek bragging rights.
Our home is in the HFC network footprint. Back in December 2013 (!) I penned a blog post about how HFC (while definitely not as good as pure fibre) was still capable of speeds well over 100 Megabits per second, and definitely a dramatic improvement over (sigh) FTTN.
I don’t think I was expecting it to be a seven year wait (!) but at last, here in 2020, I have finally got there, via the very same HFC box pictured in that 2013 blog post.
To my great chagrin, I’ve not been able to obtain those > 100 Meg speeds with the ISP I founded, Internode. It seems that Internode is a prisoner of the the TPG group’s apparent disinterest in keeping up with state-of-the-art NBN home Internet speeds.
The TPG group have ignored higher speed options on fixed-wireless for more than two years so far (and yes, I have asked – repeatedly), so I have little optimism for the group to return to the forefront in fixed line speeds on the NBN in general any time soon.
Time to change providers. This was a decision I was sad about because, well, I did start Internode!
The changeover process on the NBN fixed line network is incredibly smooth and simple – such a contrast to the complicated realm that Internode and others had to navigate when it came to switching between ADSL2+ DSLAM networks.
Online signup took just a few minutes. A little later the same day I got an SMS to say that I had a 250 Megabit Internet service running with Aussie Broadband.
There was no physical change to anything. I simply got an SMS message to say it was done, and without even resetting or logging into the router, the world got…faster.
In fact, I was a bit shocked at how fast it was:
I’m used to real-world download speeds being lower than the ‘advertised’ line rate, because that advertised raw data rate typically includes TCP/IP packet overheads. By contrast, this service is achieving noticeably more than the advertised speed(!).
It is also amazingly consistent. At 8pm I tried again and instead of a 274 megabit per second speedtest result, I managed a ‘mere’ 273 Megabits per second. Indeed I am yet to see a speedtest result below 250.
“Nice upstream speed, kid…gonna miss it after the upgrade?”
One thing I am a bit sad about, and it is not Aussie Broadband’s fault, is the NBNCo decision to speed constrain the upstream direction on the NBN ‘250’ services to a mere 25 megabits per second. The NBNCo 100M service has a 40M upstream, and the loss of that faster upstream (and that’s what I used to have) real does peeve me a bit.
In my view, constraining the upload speed artificially is akin to a gangster charging ‘protection money’. This level of asymmetry (10:1) is a bit unreasonable when all of the underlying backhaul/CVC/etc links are full duplex (i.e. same-speed-both-ways) data paths, so the upstream pipes are mostly full of ‘air’. At the same ratio as the 100M NBNCo service, there really should be a 100M uplink speed on this service.
Anyway – it is what it is, and in this regard I am merely a paying customer.
(My Aussie Broadband Refer-A-Friend Code is 4549606 if you feel like doing the same thing and if you’d like a $50 credit when you sign up 🙂 )
Does it matter – can you tell the difference?
It turns out that you can.
Web browsing of even content-rich sites is now visibly ‘snappier’, which isn’t earth-shattering, but it is very nice.
It is (of course) in the downloading of large chunks of data that the speed difference really comes to the fore.
I found myself downloading the latest Mac OS X release, Catalina, that weighs in at around 12.5 Gigabytes (!). I hit the ‘Download’ button on the Mac App Store and went off to make a cup of coffee, being used to this sort of thing taking a fair old while, even on a 100M link.
I came back to the Mac a little over 5 minutes later and it was fully downloaded and waiting for me to hit the ‘start’ button to do the upgrade. I had to get the calculator out to decide if that was even possible…and it is. The speeds I am achieving equate to more than 2 Gigabytes per minute of achieved payload data rate. Mercy Sakes that is quick.
Another few hundred gigabytes of Dropbox folders needed to be synchronised over the Internet link into that same Mac. Sure, that took a few hours, but again it was way faster than it had ever happened before. A few hundred gigabytes.
Overall – I’m really loving this.
There is just no sense of conflict in usage by different household members, even when a few household members are are streaming high bandwidth 4K HDR content at the same time (and…they really do).
Even while that Mac was chugging away in a corner, re-synchronising hundreds of Gigabytes of Dropbox folders onto its onboard SSD, the Internet service remained just lightning-fast for everyday tasks.
The Weakest Link
Back in the ADSL2+ days at Internode, we would often have to chase down apparent Internet link speed issues that really turned out to be local (in-house) issues with WiFi base stations or other in-house network issues – even at a mere 10-20 megabits per second. The state of the art in routers and wifi at the time was a lot worse than it is today.
By contrast, the 270 megabit per second down speed test results I am consistently obtaining with my shiny new Aussie Broadband service are being achieved to a laptop over WiFi on the kitchen table – not even using a wired network port (!).
I have tried again on a wired port, just to see if it was different and it was exactly the same. Somewhere between my glass-half-full blog post about HFC in 2013 and now, the rest of the home network technology concerned has comprehensively ‘caught up’.
For interest, the on-site data path is:
A Ubiquiti EdgeRouter-X. This router is more than up to the speed task, rock solid and reliable, has automatic backup link failover, and the 5 port model I have at home comes in at under A$90. Incredible. This is a disruptive, excellent value device that is worthy of a separate review in its own right.
An old TP-Link rack-mount gigabit switch.
Multiple trusty Apple Airport Extreme base stations spread around the house, all connected on wired ethernet back to the central switch. Also well up to the task, but Apple don’t make ’em any more.
My (now) 3.5 year old MacBook Pro.
I’m intending to swap it all that out in a little while for a new set of Ubiquiti ‘UniFi’ series hardware (UDM-Pro, UniFi PoE switches and UniFi PoE Wireless Access Points).
I do not expect that change to create a speed gain. However, I deployed that full product set on our farm recently across a six site single mode fibre ring and – wow. That product set achieves everything on a complex site that used to take days of head-scratching with a Unix command line, and it turns it all into 10 minutes of point-and-click with a web browser. Again well deserving of a separate review sometime.
I am just loving the new 250 Megabit per second Internet service at home. Having spent most of my business career involved in the engineering of local, national and international many-gigabit-per-second networks, its nice to have something at home that – at last – feels like it is decently quick.
I’m hanging out for the full Gigabit service, though, on the happy day when NBNCo manage to get fibre down my street. Bring that on !
Today I experienced an ironic example of an Internet Service Provider (ISP) successfully avoiding any consideration of a well meaning (and simple!) suggestion to improve their offerings. It is ironic because the ISP concerned is Internode, the company I founded in 1991.
I meant well in trying to help them to improve their service offering, but all I wound up doing was falling down a funny / sad rabbit hole in terms of where those efforts landed me, as you will see.
I used what appeared to be the appropriate email address (found on this page):
This is what I sent (very lightly edited for additional clarity):
From: Simon Hackett
Subject: The absence of support for Fixed Wireless Plus is a strange
and unfortunate deficiencyDate: 17 October 2020 at 1:21:38 pm ACDT
I have a 25 Megabit fixed wireless service in Tasmania.
This is the fastest Fixed Wireless offering available from
Fully appreciate this sheets home to TPG decisions on how the NBN
Fixed Wireless service is operated - but - NBNCo introduced a new,
higher speed/best effort (up to 75/10) Fixed Wireless service a
long time ago (December 2018!).
I have tried repeatedly since to get my service upgraded to
support those higher speeds, but I have confirmed (on multiple
occasions) with the sales team that there is no plan to have
Internode able to offer those higher speeds… which is just crazy,
I think I’ve given Internode at least a year to fix this - and it
isn’t getting fixed - that much is clear.
So - I’ve now given up and signed up with Aussie Broadband and as
of yesterday, I am indeed enjoying > 60 megabit per second
speeds on the same site with the same hardware and the performance
change is dramatic.
I will call the accounts team on Monday to cancel down the old
Internode services at the site concerned (snbs client ID is
<REDACTED>, for reference).
As the person who founded Internode, I have found it hugely
disappointing - indeed actually upsetting - to have had to do
this… but (sincerely) this ball (in terms of supporting fixed
wireless customers) has been comprehensively dropped on a long
term basis by the TPG group. Supporting the now-current Fixed
Wireless service offering and rolling existing customers over to
it would be trivial.
It beggars belief that this is not being done - but - well -
obviously it is not.
For the sake of not losing customers in Fixed Wireless over time
in this entirely avoidable manner, I would challenge you to
actually fix this. It won’t help me, any longer, but it would help
YOU (and your existing and future customers).
I got an email reply promptly back from iiNet (note: not from Internode), which said:
Would you mind providing your account number or mobile number for us to
assist you further.
iiNet Customer Relations
I pointed out in reply that I had in fact already provided this information.
What floored me is what came back next:
Thank you for your email and I do apologize for the delayed response.
Please contact internode directly via the following link:
Their contact details are via the above website.
Customer Service Representative
iiNet Limited, Locked bag 16, Cloisters Square WA 6850
ph: 13 22 58 fax: 1300 785 632
Um… excuse me?
Here’s the bottom line – I tried, but – having been taken on a complete runaround for my trouble, well, I’m outta there…
…and wondering why I gave them more than year to fail to address my original issue (as per my email above) before I left. Loyalty, I guess.
My Aussie Broadband ‘Refer-a-Friend’ code is 4549606 if you’re considering the same move, and it will get you (and me!) a $50 credit if you use it.
Thus far I’ve been highly impressed with the outcome, and I’ll have more to say about that later.
(Full Disclosure: I have also purchased some ASX:ABB shares after their recent IPO)